Chimney Repairs in Kingswinford
Chimney stacks repointed, rebuilt and flashed in properly by a team that does the brickwork and the roofing, not one or the other. Around eight miles south of our base.
Chimney Repairs for Homes in Kingswinford
Kingswinford’s chimneys are the tidy, modest stacks of postwar private building, single or twin flues serving fireplaces that many households retired decades ago. Fifty-plus years on, their mortar and flaunching are due attention, and the standard package, repoint, recast, cap the dead flue, renew the flashing, sets them up for decades more.
We cover Kingswinford and the surrounding area: Wall Heath, Summerhill, The Village green area, Charterfields, Bromley and beyond (DY6).
Get a Free Kingswinford Quote
What’s Included
A share of these homes have brought stacks back to life for wood burners, which raises the outside standard the stack has to meet. We deal with the masonry, flaunching, pots and weathering, and are clear where the stove installer’s responsibilities take over inside the flue.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds in matching brick
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Roofer and bricklayer on the same scaffold
How It Works
Chimney Repairs in Kingswinford, FAQs
A quick check is worth it at that age, stacks fail at the top first, where you cannot see from the ground, and a five-minute look from a ladder either buys you peace or catches a cheap repoint before it becomes a rebuild.
Yes, the live flue keeps a suitable pot or cowl and the dead one gets a ventilated cap, done together in one visit. Mixed live-and-dead stacks are the Kingswinford norm and the hardware exists for exactly that.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm properly from a ladder or scaffold.
It can be. Stacks lean when the mortar on the weather side wears faster, and a badly leaning stack in wind is a genuine risk to whatever is below. If yours has a visible lean, get it looked at soon. Making it safe is quick; rebuilding it is planned work, not an emergency, if caught early.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, brick, flaunching and lead, whenever we look at a leaking chimney.