Chimney Repairs in Coseley
Chimney stacks repointed, rebuilt and flashed in properly by a team that does the brickwork and the roofing, not one or the other. A short run south through Bilston.
Chimney Repairs for Homes in Coseley
Coseley’s terrace rows carry their chimneys in ranks along the party walls, and most have been retired for decades, which is exactly when they quietly decay. The common package here is simple and effective: repoint the stack, recast the flaunching, cap the dead flues, and renew the flashing, done once, good for many years.
We cover Coseley and the surrounding area: Roseville, Wallbrook, Deepfields, Hurst Hill, Ladymoor and beyond (WV14, DY4).
Get a Free Coseley Quote
What’s Included
Where a stack is too far gone, taking it down below the roofline and tiling over is often the best money on a modest house, it removes the maintenance liability entirely. We are bricklayers, so either path, rebuild or removal, is done properly and matched to the row.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds in matching brick
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Roofer and bricklayer on the same scaffold
How It Works
Chimney Repairs in Coseley, FAQs
Less than most people fear if it is caught at the repoint-and-cap stage, these are compact stacks and the access is the biggest single cost. We quote exactly after a look, and if removal is the cheaper long-term answer we will say so.
Yes, and it is much cheaper per house, one access setup serving neighbouring stacks splits the biggest cost across the row. If a few households are interested we will quote it as a job lot with individual prices.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm properly from a ladder or scaffold.
It can be. Stacks lean when the mortar on the weather side wears faster, and a badly leaning stack in wind is a genuine risk to whatever is below. If yours has a visible lean, get it looked at soon. Making it safe is quick; rebuilding it is planned work, not an emergency, if caught early.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, brick, flaunching and lead, whenever we look at a leaking chimney.