Chimney Repairs in Bilston
Chimney stacks repointed, rebuilt and flashed in properly by a team that does the brickwork and the roofing, not one or the other. Ten minutes south of our base.
Chimney Repairs for Homes in Bilston
Bilston’s terrace chimneys worked hard, coal fires ran under them for a century, and the flue gases left their mark inside the brick. That is why so many stacks here lean or show mortar eaten away on one face: old sulfate attack from the flue plus weather from the prevailing side. The fix ranges from a deep repoint to taking the stack down to sound brick and rebuilding.
We cover Bilston and the surrounding area: Bradley, Stowlawn, The Lunt, Bunker’s Hill, Portobello and beyond (WV14).
Get a Free Bilston Quote
What’s Included
We are bricklayers first, so Bilston stacks get rebuilt in matching brick with the courses and caps looking right for the terrace, flaunching recast, pots reset or capped, and new lead dressed into the joints. Shared party-wall stacks can be quoted jointly with next door, which is usually the sensible way.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds in matching brick
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Roofer and bricklayer on the same scaffold
How It Works
Chimney Repairs in Bilston, FAQs
Decades of coal-fire flue gases weakened the mortar from inside while the weather worked on the outside, and stacks bend toward the sheltered side as the exposed joints wear faster. It is common on Bilston terraces and fixable, a rebuild from the roofline up in matching brick if the lean is established.
It needs taking seriously, Bilston terraces front straight onto pavements, so anything that comes off a stack lands where people walk. If yours has a visible lean, get it looked at promptly; making it safe is quick and the rebuild can then be planned normally.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm properly from a ladder or scaffold.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, brick, flaunching and lead, whenever we look at a leaking chimney.
Yes, but with a ventilated cap or cowl rather than sealing it solid. A capped, ventilated flue keeps rain and birds out while letting the stack breathe, which stops damp building up inside the chimney breast. It is a small job that prevents a common problem.