Flat Roofing in Darlaston
Garage, extension and dormer roofs in EPDM rubber, GRP fibreglass or felt, laid with proper falls so water leaves instead of ponding. Fifteen minutes east of our base.
Flat Roofing for Homes in Darlaston
Darlaston’s flat roofs echo its workshop past, garages, stores and outbuildings behind the terraces, some still with their original corrugated or boarded roofs, plus the usual porches and back additions. The town’s council stock adds runs of flat-roofed outriggers and stores built with the houses.
We cover Darlaston and the surrounding area: The Green, Kings Hill, Fallings Heath, Moxley, Bentley edge and beyond (WS10).
Get a Free Darlaston Quote
What’s Included
We recover the lot in EPDM or GRP over corrected decking, and where old corrugated cement sheeting is involved we handle and dispose of it properly, that material needs respect, not a sledgehammer. Small practical roofs, done once, done right.
- EPDM rubber, one-piece membrane with no seams
- GRP fibreglass with a hard-wearing gel top coat
- High performance felt where it suits the job
- Falls corrected so water drains instead of ponding
- Rotten decking cut out and replaced
- Proper edge trims, outlets and upstands
How It Works
Flat Roofing in Darlaston, FAQs
Yes, old cement-based sheeting gets handled and disposed of under the correct procedures, then the roof is re-covered in modern box profile or a boarded EPDM finish. It is a routine job for us and absolutely not one for a casual skip run.
If the walls are sound, usually yes, a failed roof takes the garage down with it within a few years, while an EPDM recover keeps the building useful for decades. We will give you the honest price and you can weigh it against replacement.
Both are excellent when fitted right, so it comes down to the roof. EPDM suits larger, simpler roofs because it goes down in one continuous sheet and copes with a bit of movement. GRP gives a hard, walkable finish and crisp edges, which suits smaller roofs, balconies and roofs with lots of detail. We quote whichever suits yours, or both so you can compare.
Old style felt was ten to fifteen years if you were lucky. A properly fitted EPDM or GRP roof is a different class: the materials themselves are rated for decades. The weak point is always the workmanship at edges and outlets, which is exactly where we take the most care.
Standing water, called ponding, ages any flat roof faster: it strains the membrane, freezes in winter and finds any weak seam. Sometimes the fix is as simple as correcting the falls with firring or a tapered board when the roof is recovered. If your roof ponds, it is worth a look before it starts leaking.